Metabo Corp., of West Chester, Pa. is recalling about 4,300 W14-150 Ergo series 6-inch medium angle grinders.
The angle grinders have a green body, a black and red handle, and a silver head and wheel guard. The grinders measure about 16 inches long by 4 inches wide by 5 inches deep, have a 6-inch wheel capacity and weigh about eight pounds. Metabo is printed on the handle and Metabo 14-150 Ergo is printed on the side of the grinder. The grinders are used for grinding and cutting metal. Model numbers include 06251421 and 06251441 and serial numbers include 3010000001 through 4020031488 for both models. The model and serial numbers are located on the rating plate on the right side of the tool.
Metabo has received two reports of the angle grinder switches sticking in the "On" position. No injuries have been reported.
Consumers should immediately stop using the angle grinders and should contact Metabo to receive a free repair or replacement.
The tools were sold through industrial, construction and welding distributors to consumers from March 2013 through April 2014 for about $220.
Contact Metabo Corp. at (800) 638-2264 from 8:30 a.m. to 5 p.m. ET Monday through Friday, or email email@example.com.